Global (USD)
Tascam DR-701D 6-track Recorder for Video Production
PRODUCT OVERVIEW
For filmmaking, television, audio-for-VR, and web broadcast applications where you want to record direct sound, ambience, and your real-time mix, the Tascam DR-701D multitrack field recorder is an ideal companion for your DSLR. Capture up to four tracks of high-resolution audio from external sources and the onboard omnidirectional microphones plus a stereo mix, route audio to and from your camera, and conveniently monitor through headphones. With versatile mounting possibilities, timecode support, and tight camera sync via HDMI I/O, the DR-701D integrates seamlessly into your video production setup.
Versatile powering methods and remote-control options make the DR-701D ideal for location recording and extended video shoots. Its four balanced XLR-1/4" combo inputs handle mic- or line-level signals (even +4 dBu from high-end sound mixers) and can independently supply phantom power. A 3.5mm mic/line input with selectable plug-in power is provided for situations that require you to record a lavalier microphone or the output of a wireless receiver. Utilize settings such as stereo safety track recording, automatic level control, limiting, and low-cut filtering to achieve a clean, undistorted recording. Thanks to its available Ambisonics A-/B-format recording with real-time stereo monitoring, the DR-701D is ready to produce audio for your next AR or VR project.
Features at a glance
- SD/SDHC/SDXC cards used for recording media.
- 6 maximum simultaneous recording tracks
- MONO, STEREO, 2MIX, DUAL MONO, DUAL ST and DUAL2MIX recording modes
- Recording formats: 16/24-bit, 44.1/48/96/192kHz (WAV/BWF) (192kHz only for two-track recording)
- Built-in original TASCAM HDDA mic preamps provide high audio quality
- Input levels can be adjusted separately for each track
- XLR/TRS inputs support +4dBu line level and 24/48V phantom power
- Clock and record start/stop can be synchronized with a camera using the HDMI port
- DR-701D audio signal can be output to an external camera or recorder from the HDMI OUT or line output
- Cascade function using HDMI connections allows multiple DR-701D transport and monitoring operations
- SMPTE Timecode can be input through the TC IN connector to add recording start times to files
- Timecode generator (RTC) allows recording start times to be added to files even when there is no timecode input
- Plug-in power mics and high output mics (EXT IN 1/2) supported
OUT (CAMERA OUT) connector can output audio mixed by the DR-701D to a DSLR camera- IN (CAMERA IN) connector enables monitoring the sound from a DSLR camera through the DR-701D
- High quality audio output through a line output jack separate from the headphones jack
- Headphones jack with 50mW+50mW maximum output
- Tripod attachment threads (bottom), camera screw attachment that can be installed or removed with a coin (top) and shoe mount (top) included
- Handles on the left and right sides of the front protect the control surface and also enable attachment of a shoulder strap
- Transport and SLATE buttons made of rubber suppress noise during operation
- HOLD switch prevents misoperation
- 128×64-dot graphic LCD with backlight
- LED lights have high visibility even in direct sunlight
- High-speed transfer of files to computers possible using USB 2.0
- Micro-B type USB cable included
- Powered by 4 AA batteries, USB bus power or a PS-P515U AC adapter (sold separately)
- BP-6AA external battery pack (sold separately) enables operation for even longer times
- Optional RC-3F foot switch and RC-10 wireless remote control can be connected (both sold separately)
- Built-in mixer enables pan and level adjustments as well as solo monitoring and can output a mix of 4 channels
- GANG function allows the levels of multiple channels to be controlled simultaneously
- Individual channel trim settings shown
- 5-position low-cut filter (50/80/120/180/220 Hz) cuts unwanted low frequencies
- Multiband limiter automatically adjusts input overloads (stereo-linking possible with 1/L and 2/R)
- Delay function can compensate for distances between mics (+/-150 ms)
- Mid-side decoder function enables use with mid-side stereo mics
- Slate tone insertion functions (AUTO/MANUAL)
- Slate tone insertion points can be selected (recording start or recording start and stop when slate AUTO function used)
| Product Name | Tascam DR-701D 6-track Recorder for Video Production |
|---|---|
| Weight | 1.00 Kg |
| Frequency Range (-10 dB) | 20 Hz to 20 kHz +0.5/-1 dB (At 48 kHz, JEITA) |
| Impedance | 2 Kilohms |
| Max. Power Consumption | 6.5W(maximum) |
| Dimensions | 169(W)×57.3(H)×113.5(D)mm (with the top adapter attached) |
| Manufacturer | Tascam |
| Color | Black |
| Country of Origin | United Arab Emirates |
